DLA-SH7NL High-brightness 4K Visualization Series Projector (without lens) • JVC Россия

High-brightness 4K Visualization Series Projector (without lens)

DLA-SH7NL

JVC’s DLA-SH7NLG D-ILA projector incorporates three 1.27-inch 4K2K D-ILA display devices for high-quality imaging four times sharper than full HD. Combining superb definition and colour reproduction – including true black – with low-cost maintenance, the projector is a perfect fit for planetariums, museums, simulators and medical institutions, as well as use for high-spec designing and monitoring.

Функции

Native 4K (4096x2400) D-ILA device x3
Dual lamp UHP light source
5000lm brightness
Optional graphics interface for color management
Optional lenses
Four dual-link DVI input terminals enable simultaneous multi-screen display (two or four display mode)
Centralized Optic
Flexible mounting in the projection axis up to plus/minus 90°
Used in Flight-Simulators / Planetariums and Research and Development Centers
Optional Mechanical Shutter for special Smear Reductions

High native contrast ratio of 10,000:1

Посмотреть все

Спецификации
Аксессуары
Поддержка

Спецификации

DLA-SH7NL - High-brightness 4K Visualization Series Projector (without lens)

Функции

The DLA-SH7NLG is an advanced 4K2K projector incorporating three 1.27-inch 4K2K D-ILA display devices. It produces extremely high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design and monitoring facilities. Its dual ultra-high-pressure mercury lamps and wire grid optical system produce 5,000 ANSI lumens of brightness and offer a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low-cost maintenance, the DLA-SH7NLG achieves ultra-high resolution of approximately 10 megapixels (4,096 x 2,400), which is five times the resolution of full HD.

The projector can simultaneously display two or four screens in WUXGA (1,920 x 1,200) resolution. Multi-screen projection is facilitated by four DVI (Dual-Link) input terminals supporting an array of PC input formats. The DLA-SH7NLG also offers a low latency mode for simulation environments.

The DLA-SH7NLG has both dual and single lamp modes. When in the single lamp mode, the projector automatically chooses the lamp with less cumulative operating time for maintenance efficiency. This, plus the addition of a low-power mode, enables lamp life of approximately 3,000 hours, which is about double that of conventional projectors. Such features allow the DLA-SH7NLG to offer low running costs even under heavy professional use.

The DLA-SH7NLG operates on normal AC 100-220V power and consumes less than 1.1 kW. Convergence is adjustable to 1/10 pixel accuracy via GUI control; three gamma tables are included. Six test patterns, including a crosshatch and color bars, enable image adjustment without external signal sources. Projection configuration data is easily stored and uploaded from a USB memory device. The Ethernet-compatible DLA-SH7NLG can be configured via a PC Web browser, and multiple projectors are networkable for operation via a single PC. Plus, for improved maintenance, e-mails can be generated automatically to send lamp replacement reminders and error status notifications.

Its well though-out design offers operational flexibility, including the ability to stack two projectors for passive 3D images or installation on a ±90-degree tilt.

Устройства изображения

Технология проекции: D-ILA

Размер матрицы: 1,27 дюйма

Количество матриц: 3

Натуральное разрешение: 4096 на 2400 пикселей

Максимальное разрешение: 4096 на 2400 пикселей

Polarize Light Output: YES S/P/S

Источник света

Технология источника света: Ultra-High Pressure Mercury Lamp 330Watt

Тип лампы: PK-L3310 1 Unit (need 2)

Количество источников света: 2 шт.

Ресурс в обычном режиме работы (часов): 2000 hours at Dual 100%

Ресурс в экономичном режиме работы (часов): 3000 hours at Dual 80%
you can extent by using one light source only

Яркость и контрастность

Световой поток (максимальный) ^[1]: 5000 ANSI Лм

Brightness Minimum: 4000 ANSI Lumens

Contrast Typical: От 10000 до 1

Contrast Minimum: От 8000 до 1

Uniformity: greater than 85%

Manual Light Power Control: 2 Steps 100%/80%

Dual Light Control (in case of Dual Light source): Да

Глубина цвета: 8-bit via single link DVI
12-bit maximum via dual link DVI

Объектив

Exchangeable Lens: Да

Объектив в комплекте: Нет

Support of external Mechanical Shutters: Yes electrical control out put

ФУНКЦИИ

Цветовая температура: 6500 and User mode,

Настройка гаммы: Std 2.2, 1.8 and 2.6 Gamma

Manual Gamma Settings: With dedicate Service Software

Shading adjustment: With dedicate Service Software

Управление цветом: Only with optional Hardware

Pixel Adjustment Whole Screen: Да (версия 4.2, проводной микрофон в комплекте)

Other Calibration Tools: Manual by Service software

General Hide Mode: Да (версия 4.2, проводной микрофон в комплекте)

Встроенные настроечные таблицы: Да (версия 4.2, проводной микрофон в комплекте)

Экран состояния проектора: Да

Выбор черного / синего экрана (в случае отсутствия источника входного сигнала): Да

Operation Control by Web-Interface (Internet-Browser): Да (версия 4.2, проводной микрофон в комплекте)

Входной сигнал

Входной сигнал HDMI

DVI Input Signal: 2048 x 1200 max per Channel, max Resolution 4096 x 2400 from Dual or Quad Input

Note for Signal Input combinations:: Please study for details the User manual (download) or dedicate Input format list, when available.

Signal Input combination SINGLE: DVi 1 640 x 480 to 2048 x 1200 max. Image up-scale to 4096 x 2400, other resolutions like 3840x2160 also possible according to the input source

Signal Input combination DUAL Stripes: DVI 1 and DVI 3 each 2048 x 2400 = 4096 x 2400
also 4096 x 2160 / 3840 x 2400 / 3840 x 2160 related to the input resolution

Signal Input combination QUAD -Stripes: DVI 1 to DVI 4 each 1024x2400 = 4096x2400
also 4096 x 2160 / 3840 x 2400 / 3840 x 2160 related to the input resolution

Signal Input combination QUAD Cross: DVI 1 to DVI 4 each 2048 x 1200 = 4096x2400
also 4096 x 2160 / 3840 x 2400 / 3840 x 2160 related to the input resolution

3D Format

Поддержка 3D: Да

3D Special Notes:: Passive with 2 Projectors (polarized circular filters needed)

Image Timing Data

Latency for Simulation or Video Lip sync in ms.: <10ms @ 4-stripe mode

Разъемы

Вход DVI: YES 4 Ports

Порт RS-232C: Да

Терминал LAN: Да

USB Service Terminal: Type A(сервисный разъем)

Разъемы управления

Порт RS-232C: Да

Терминал LAN: Да, RJ45

Power and Environment

Уровень шума вентилятора (0-26 градусов): <39dB (A) at 39.4”/1m (3.3ft)

Требования к напряжению: Сеть переменного тока напряжением 110-240 В частотой 50/60 Гц

Энергопотребление: 1100 Watts

Энергопотребление в режиме ожидания: 6W

Operation Temperature: 10°C to 35°C

Рабочая влажность: От 20% до 80%

Storage Temperature: -5°C to 60°C

Высота установки: below 2000 Meters

Угол установки: Vertical ±90 degrees, Horizontal ±5 degrees

Размеры Ш х В х Г: ширина 663 x высота 362 x глубина 793 mm

Вес: 50,5кг

Airflow requirement: 3 m3 per minute minimum IN/OUT Take

Calorific Value: 3,960kJ/h (946kcal/h)

Установочная схема: ON/OFF need to set to ON over 1500 Meter

Motion Platform usable: Yes please contact us for Force-Data

В комплекте с устройством

Кабель питания AC: US AC

Cord B: EU AC

Прочее: Safety Info Doc include for Full Instruction, please download form this web site

Общие примечания

Важно:: Имитированные изображения. Значения для веса и размеров являются приблизительными. Конструкция и технические характеристики могут быть изменены без предварительного уведомления.

[1] typical @High bright mode